The 10 Best Ipad Tablet Offers in UK - September 2025

Resetting your iPad tablet can be a common solution for various problems such as frozen screen, slow performance, or an unresponsive device. In this article, we will discuss how to reset your iPad and what are the different methods available for you to do so.

Method 1: Soft Reset
A soft reset is just like restarting your iPad. To perform this, press and hold the Power button until the "slide to power off" message appears. Then, swipe the slider to turn off your iPad. Wait for a few seconds and press the Power button again to turn it back on.

Method 2: Hard Reset
If your iPad is frozen or unresponsive, you can perform a hard reset. To do this, press and hold both the Home button and the Power button at the same time, until the Apple logo appears. This process may take around 10-15 seconds, so don't release the buttons until you see the logo.

Method 3: Factory Reset
Performing a factory reset will erase all your data, personal settings, and installed applications from your device. To do this, go to Settings > General > Reset > Erase All Content and Settings. You will be prompted to enter your passcode and Apple ID password. After that, tap on Erase, and your device will be restored as if you just bought it from the store.

Method 4: DFU Mode
DFU (Device Firmware Upgrade) mode is a state in which your iPad can communicate with iTunes even when your device is not fully powered on. It is mostly used for restoring your iPad's firmware to fix severe problems. Follow the steps below to enter DFU mode:
1. Connect your iPad to your computer and launch iTunes.
2. Press and hold the Power button and the Home button at the same time for precisely ten seconds.
3. Release the Power button but keep pressing the Home button for an additional five seconds.
4. iTunes will notify you that your device is in DFU mode. At this point, you can restore your iPad in iTunes.

In conclusion, you have multiple options to reset your iPad depending on your device's condition and troubleshooting needs. Whether you want to perform a soft reset, hard reset, factory reset, or enter DFU mode, the procedures are straightforward. However, before doing any reset, make sure to back up your data to avoid losing important files.

The iPad and iPad Pro are two popular tablets released by Apple. While they both share similarities, they also have distinct differences that set them apart. Understanding these differences can help you decide which tablet is best for you.

First and foremost, the iPad Pro is larger than the iPad. The iPad Pro comes in two sizes, an 11-inch and a 12.9-inch display, while the regular iPad has a 10.2-inch display. The larger size of the iPad Pro means it has more screen real estate and is better for multitasking, making it ideal for professionals who need to work on multiple apps simultaneously.

Another major difference between the two tablets is their processing power. The iPad Pro features Apple's latest and most powerful A-series processor, while the iPad has a less powerful A-series processor. This means that the iPad Pro can handle more demanding tasks, such as video editing and gaming, with ease.

In terms of design, the iPad Pro is more sleek and modern looking than the regular iPad. The iPad Pro features a flat edge design with no home button, while the iPad has a round edge design with a home button. The iPad Pro is also lighter than the iPad, making it easier to carry around.

One of the biggest differences between the two tablets is their compatibility with Apple Pencil and Smart Keyboard. While both tablets are compatible with Apple Pencil, only the iPad Pro can be used with the second-generation Apple Pencil that attaches magnetically and charges wirelessly on the side of the tablet. The Smart Keyboard is also exclusively for the iPad Pro, as the regular iPad does not have the Smart Connector for attaching the keyboard.

Finally, the price difference between the iPad and iPad Pro is quite significant. The iPad starts at $329, while the iPad Pro starts at $799. The higher price of the iPad Pro reflects its more advanced features and capabilities.

In conclusion, while both the iPad and iPad Pro are excellent tablets, they are designed for different needs and purposes. The iPad is a great budget-friendly option for everyday use, while the iPad Pro is ideal for professionals who need a more powerful and capable tablet for work. Ultimately, it comes down to your budget, needs, and preferences when choosing between the two.

Downloading apps on your iPad tablet is a simple process that can be done in just a few easy steps. The App Store, which is installed on your iPad by default, is the platform where you can find and download various apps. Here are some steps that will help you in downloading the apps on your iPad :

1. Open the App Store on your iPad - To begin downloading your favorite app, locate and tap on the "App Store" icon on your iPad's home screen. With just one tap, you will be taken to the App Store's homepage, where you can start browsing various apps.

2. Search for an app - Next, type the name of the app you want to download in the search bar at the top of the App Store's homepage. If you're not sure about the name of the app, you can even search for app categories, such as "games," "education," and so on.

3. Choose an app - From the search results, tap on the app you want to download. This will take you to the app's page, where you can learn more about its features, read reviews, and view screenshots.

4. Click on the "Get" or "Buy" button - If the app is free, you'll see a "Get" button beside its icon. Tap on this button, and the app will start downloading. If it's a paid app, you'll see a "Buy" button instead. Tap on this button, and you'll be asked to enter your Apple ID and password to complete the purchase.

5. Wait for the app to download - After clicking on the "Get" or "Buy" button, you'll see a progress bar that shows you how much time is required for the app to download. Once the download is complete, the app's icon will appear on your iPad's home screen.

6. Launch the app - To use the app, simply tap on its icon on your home screen. Allow the app to finish installing, and then you'll be ready to use it.

In conclusion, downloading apps on your iPad is an easy process that anyone can follow. Just head over to the App Store, search for the app you want, and download it with just a few taps. You can explore various categories of apps and find some amazing ones that suit your needs. With the vast selection of apps available on the App Store, you can customize your iPad and make it work just the way you want it to.

Connecting your iPad tablet to Wi-Fi is an easy process and can be completed in a few simple steps. Whether you are at home, work or on-the-go, having access to Wi-Fi will enable you to access the internet, stream content and communicate with others.

Firstly, make sure your iPad is turned on and unlocked. This will allow you to start the Wi-Fi setup process. Once your iPad is on, go to the 'Settings' icon from the main screen.

Next, select the 'Wi-Fi' option from the menu. This will enable you to view all the available Wi-Fi networks in your area. Ensure that the Wi-Fi is turned on by toggling the on/off switch to the right.

From here, select the Wi-Fi network that you want to connect to. You will see a list of available networks, including the network name (SSID) and signal strength. Once you've chosen the network you want to connect to, tap on it.

If the network is password protected, you will be prompted to enter the Wi-Fi password. This is the password that was set up by the network administrator or owner. Once you enter the password, tap on 'Join'.

Now, you should see the 'Connected' message next to the selected network in the Wi-Fi menu. This means that your iPad is successfully connected to the Wi-Fi network, and you can start using the internet.

Finally, remember to disconnect from the Wi-Fi network when you are finished using it. This will help to conserve your iPad's battery life and protect your personal data from unauthorized access.

In conclusion, connecting your iPad tablet to Wi-Fi is a straightforward process that can be completed in a few easy steps. By following the setup process, you can enjoy seamless internet connectivity on your iPad wherever you go. Whether you are streaming your favorite content or checking your email, having Wi-Fi makes the experience all the better.

Using a mouse with an iPad tablet has been one of the most sought-after features by many users. While the iPad doesn't support mouse input as a default, there are alternatives that allow you to use a mouse with your tablet. In this article, we will explore different ways on how to use a mouse with your iPad tablet.

Firstly, you can use an external Bluetooth mouse with your iPad. To do this, you need to go to your iPad's Settings, then click on Bluetooth, and turn it on. Once you've turned on your Bluetooth, you can pair your mouse by following your mouse's pairing instructions. Once paired, you can use your mouse as a pointer on your iPad and navigate through different apps.

Alternatively, you can use an assistive touch feature on your iPad. Assistive touch is a feature designed to support users who have difficulty touching the screen due to physical disabilities. However, the feature can also be utilized as a pointer and can be paired with a mouse. To use assistive touch, go to your iPad's Settings, then click on accessibility, and turn on assistive touch. Once turned on, click on devices and then Bluetooth devices, and pair your mouse.

Another way to use a mouse with your iPad is by using USB-C mouse support. This feature is available for iPadOS 13.4 and later operating systems. To use a USB-C mouse, you need to connect your mouse to your iPad via a USB-C hub. Once connected, your mouse will function like a regular pointer on your iPad screen.

If you're using a remote desktop app on your iPad, you can also use a mouse with the app to control your desktop computer. Remote desktop apps like Microsoft Remote Desktop, TeamViewer, or Splashtop are great options if you need to control a desktop computer remotely.

In conclusion, using a mouse with your iPad is possible, but it requires some tweaking and additional hardware. Nevertheless, the above ways provide an alternative to using a touchscreen to navigate through your iPad's apps. If you need to use a mouse with your iPad frequently, investing in a Bluetooth mouse or a USB-C hub may be a good option.

As an iPad user, it is important to know how much storage your device has. The amount of storage on your iPad can determine how many apps, photos, and videos you can store on your device. Knowing the storage capacity of your iPad can also help you determine if you need to upgrade or delete some of your files to free up space.

All iPad models come with different storage options ranging from 16GB to 1TB. The basic iPad model, which is also the most affordable, has a storage capacity of either 32GB or 128GB. The iPad Air offers similar storage options as the basic iPad, with 64GB and 256GB models available. The iPad Pro has the highest storage capacity, with options ranging from 128GB to 1TB.

The amount of storage needed on an iPad varies depending on individual needs. If you use your iPad mainly for browsing the internet and checking emails, you don’t need much storage. However, if you capture a lot of photos and videos, or use your iPad for work or creative purposes, you may need a higher storage capacity.

When deciding what storage capacity to choose on your iPad, it is important to consider the costs associated with upgrading. The higher the storage capacity, the more expensive the device will be. Additionally, if you are planning to save files on your iPad for a long time, you may also want to consider cloud storage options, such as iCloud, to back up your files and free up space on your device.

Overall, knowing the storage capacity of your iPad is essential for making the most of your device. It helps you to optimize your usage, avoid potential storage issues, and ensure that you have enough space for all your important files. So, whether you choose to go for a basic iPad or a higher-end iPad Pro, make sure to choose the right storage capacity that suits your individual needs.

Transferring files from your computer to your iPad tablet can seem like a daunting task at first. However, it is quite easy if you know the right tools and techniques to use. In this article, we will guide you on how to transfer your files from your computer to your iPad tablet.

The first step is to connect your iPad to your computer. You can do this by using a USB cable that came with your iPad, or by using a wireless connection such as Wi-Fi or Bluetooth. Once connected, your iPad should show up as a device on your computer.

Next, you will need to install iTunes on your computer. This is a free app that is used to manage and transfer files to your iPad. Once installed, open iTunes and click on the iPad icon. From here, you can select the files you want to transfer and drag them to the iPad section in iTunes.

Another option for transferring files is to use cloud storage services such as iCloud, Dropbox, or Google Drive. Simply upload your files to the cloud storage service from your computer and then download them on your iPad using the same service.

If you prefer not to use iTunes or cloud storage services, you can also transfer files using third-party apps such as AirDrop, iMazing, or AnyTrans. These apps allow you to transfer files wirelessly between your computer and iPad.

In conclusion, there are several ways to transfer files from your computer to your iPad tablet. By using iTunes, cloud storage services, or third-party apps, you can easily move your files to your iPad for easy access and convenience. With these tools and techniques, you can make the most of your iPad and stay productive on the go.

Taking screenshots on your iPad tablet is a simple and convenient way of capturing images of your screen. It is helpful when you want to share information or save content for future reference. In this article, we will discuss different ways to take screenshots on your iPad and some tips to make the process more efficient.

Method 1 - Using Buttons:
The first and most common method for taking a screenshot on an iPad involves using the physical buttons on the device. Press and hold the Sleep/Wake button and Home button simultaneously until you see the device's screen flash. You will find the screenshot in your Photos app.

Method 2 - Using Apple Pencil:
If you have an iPad Pro with an Apple Pencil, taking a screenshot can be done with ease. Simply take your Apple Pencil and swipe up from the bottom right or left corner of your screen. A screenshot of the current screen will be saved to your Photos app.

Method 3 - Using AssistiveTouch:
If you have difficulty accessing the Home and Sleep/Wake button on your iPad or have an iPad with a broken button, using AssistiveTouch is a better option. To enable AssistiveTouch, go to Settings > General > Accessibility > AssistiveTouch. Once enabled, tap the AssistiveTouch button and select Device > More > Screenshot. Your screenshot will now be saved in your Photos app.

Tips for Taking Screenshots:
To make the process of taking screenshots more efficient, here are some tips you can use:

1. Use the Markup feature to annotate screenshots and highlight important information.

2. Save your screenshots to iCloud or iCloud Drive for easy access across multiple devices.

3. Use the built-in shortcut for sharing screenshots via AirDrop, Messages, email, or any other installed application.

4. When sharing screenshots with others, use the share sheet feature to crop or adjust the screenshot to fit what you need.

In conclusion, taking screenshots on your iPad is a quick and easy process with multiple options available. Whether using physical buttons, Apple Pencil, or AssistiveTouch, screenshots can be useful for saving information and sharing with others. Using the tips provided can help make the process more efficient and effective.

Using split screen on an iPad tablet can be a great way to multitask and be more productive. With split screen, you can have two apps open side by side, allowing you to work on both at the same time. Here's how to use split screen on your iPad:

1. Open the first app you want to use. This will become the primary app that takes up the majority of your screen.

2. Swipe up from the bottom of your screen to open the app switcher. Your recent apps will appear in a row at the bottom of your screen.

3. Find the second app you want to use and drag it to the side of the screen. You can place it on the left or the right side, depending on your preference.

4. Adjust the size of each app by dragging the divider between them. You can make one app larger than the other, or split them evenly.

5. When you're done using split screen, simply drag the divider all the way to one side to close the second app.

6. To switch the order of the apps on your split screen, hold down on the divider and drag it to the other side of the screen.

Using split screen on your iPad can be a real time-saver, especially if you need to reference information from one app while working on another. Some apps may not support split screen, so keep that in mind when selecting which apps to use.

In conclusion, split screen is a great feature on your iPad that allows you to multitask and be more productive, and it's pretty easy to use. Give it a try the next time you need to work on two things at once!

Backing up your iPad tablet is an essential process that you should not ignore as it can help you recover important data in case of loss or damage. In this article, we will discuss the steps on how to backup your iPad and the different methods you can use to achieve it.

The first method is to backup your iPad to iCloud. To do this, make sure that your iPad is connected to Wi-Fi, then go to Settings > iCloud > Backup. Turn on iCloud Backup, and then tap Back Up Now. This will immediately start the backup process.

The second option is to backup your iPad to your computer using iTunes. Connect your iPad to your computer using a USB cable, then launch iTunes. Select your device, and then click on Summary. In the Backups section, choose This Computer, and then click on Back Up Now.

Another method you can use is to backup your iPad to another device using AirDrop. This option is suitable if you want to transfer data to another Apple device within range. To do this, go to the file or data you want to transfer, then tap on the Share button. Select the device you want to transfer the data to and wait for the transfer to complete.

If you have a large amount of data to backup, you can use third-party software like iMazing. This software allows you to backup your iPad wirelessly or over a USB connection. You can select the data you want to backup and then start the process. This option is convenient when you want to backup an entire iPad, including app data, messages, contacts, and media files.

Finally, you can also use a cloud backup service like Dropbox or Google Drive to backup your iPad data. Simply install the app on your iPad, and then upload the data you want to backup. This option is suitable for smaller files like documents, photos, or videos.

In conclusion, backing up your iPad is a crucial process that should not be ignored. Whether you choose iCloud, iTunes, AirDrop, third-party software, or cloud backup services, ensure that you perform regular backups to avoid losing important data.